Emergency Boot Disk

How to make a Windows Startup Disk Xp

When you press the power button on your computer and just sit

there with any of those clicking and beeping sounds with

the monitor still have that white screen, you know you

will have a bad day.

A computer that does not start can be one of the worst

staking things that can happen to a user.And pc in most cases,

the user does not have a clue as to what procedures they can take

to get the PC working again.

When you do fail to boot PC experience, always begin your

troubleshooting by checking the obvious.It cord plugged

wall outlet and the other end plugged into the

rear of the unit system.

In many cases the cause is a corrupt boot file

prevent the computer from booting through from start to

finish.In this case, an easy way to start your PC is to have

emergency boot disk handy.

A boot disk containing copies of critical files needed for startup

earlier.To that you made the floppy disk, all

you need to do is put it in the floppy drive and restart the

computer.

As computer start the boot process, Windows will use the

Keep good records to be going.The Windows XP startup disk

help you solve a pilot Ntbootdd.sys corrupt or missing

Ntdr corrupt files Ntdetect.com.

These files are used by Windows XP and are essential to its

Startup disk and start configuration.The also repair

damaged MBR or Master Boot Record.

The MBR is a small program run at startup and the PC

resides on the first sector of the driveIt hard look at the

partition on the hard drive.You can generate an MBR with the FDISK

/ MBR coomand

A damaged boot sector can also be corrected with the boot

disk.Your Windows XP startup disk will be a life saver when you

pc startup failure and you need this file for your next

interview.

A sector is the smallest unit that can be consulted on a

disk.When a disk is low level formatting, it will be divided

tracks and sectors

When you make a boot disk make a mental note of the files being

copied.This give you added knowledge when you need

help them start disk.To make a boot disk, follow

below.

Place a blank formatted floppy disk into your floppy drive and go

My Computer in Windows XP.Click the hard drive icon and

the toolbar, click Tools, Folder Options, then click the

View tab.

And scroll down and check "Show hidden files and folders" and

just below uncheck "Hide protected files OS

(Recommended). Now we get a little slower.

Take note of this process and you become more familiar with

this task, you will be able to make a boot disk for others in any

time and help save on downtime.

After unchecking "Hide protected files of the operating system, click

OK.Some grayed files will now be visible in the drive

window.These files are protected system files.

You are now ready to select the startup, the NTDETECT, and ntldr

files.Now right click, click Send To, then select Floppy (A:

Comments

There are no comments.

Leave a Comment